+86 13777722188 
Iikliphu zoxinzelelo ezilungisiweyo (i-SNL)
Iimbonakalo
Amandla aphezulu: I-conductor tension clamp nganye inobude obungaphezulu obujijekileyo, ukuqinisekisa ukuba amandla angaphambi koxinzelelo afikelela ngaphezulu kwe-95% yamandla okuqhekeza alinganisiweyo omqhubi (CU/JS).
Ukusasazwa koxinzelelo olufanayo: I-clamp ayilimazi i-conductor kwaye isasaza uxinzelelo ngokulinganayo, iphucula amandla e-conductor okulwa nokungcangcazela kwaye yandisa ubomi bayo benkonzo.
Ukumelana nokugqwala okugqwesileyo: Izinto ezisetyenzisiweyo zihambelana ngokuchanekileyo nomqhubi, ziqinisekisa ukumelana nokugqwala okunamandla.
Ufakelo oluLula: I-clamp ingafakwa ngesandla kwindawo ngokukhawuleza nangokulula, ngaphandle kwezixhobo ezikhethekileyo—umntu omnye angayigqiba le nkqubo.
Umgangatho woFakelo oluQinisekisiweyo: Umgangatho wofakelo kulula ukuwuqinisekisa, kwaye ulungelelwano luphezulu. Akukho qeqesho lukhethekileyo lufunekayo, kwaye uhlolo lungenziwa ngokubonakalayo. Inkangeleko ilula kwaye inobuhle.
Ukuguquguquka Okunamandla: Iyahambelana neentsimbi ezahlukeneyo (jonga incwadi yemiyalelo yokufaka ukuze ufumane iinkcukacha).
Amandla Aneleyo Okubamba: I-clamp inesangqa esijijekileyo esiqinileyo, enika amandla aneleyo okubamba ii-conductors ezifana ne-ACSR (i-aluminium conductor steel-reinforced), ii-aluminium stranded wires, kunye nee-aluminium alloy stranded wires. Ikwaxhasa uluhlu olubanzi lobukhulu bee-conductors.
Uhlu lweentlobo
Iiklimpu zoxinzelelo lweConductor ezenziwe kwangaphambili
Iikliphu zoxinzelelo lwentambo yomhlaba ezenziwe kwangaphambili
Iiklimpu zoxinzelelo ezenziwe kwangaphambili zeMigca yokutsala
Inkcazo yeCandelo
1. Inkcazo yeenxalenye
① Iluphu ejijekileyo: Uyilo oluqhelekileyo, olufanelekileyo kwiikhondektha ezinobubanzi obuncinci.
I-Twisted loop: Kwi-conductors ezinobubanzi obukhulu, ii-twisted loop zilungelelaniswa neentlobo ezahlukeneyo zehardware.
② Uphawu lokufakela (ikhowudi yombala): Luphawula indawo yokuqala yokufakela kwaye lunceda ekuchongeni imodeli ye-clamp.
③ Ileyibhile: Umzobo wokubala amandla okutsala
Izixhobo
Ezi clamp zenziwe ngezinto ezifana neengcingo zentsimbi ezigqunywe nge-galvanized, iingcingo zentsimbi ezigqunywe nge-aluminiyam, iingcingo ze-aluminiyam ze-alloy, kunye neengcingo zentsimbi ezigqunywe nge-copper.
Amanqaku
Indlela ezijika ngayo ii-SNL tension clamps (kwiintambo zomhlaba/ii-conductors) kufuneka ihambelane. I-SNL eqhelekileyo inomjikelo wesandla sasekunene; ukuba kufuneka umjikelo wesandla sasekhohlo, nceda ucacise kwangaphambili.
Ngenxa yesakhiwo esikhethekileyo se-clamp, i-clamp nganye ingasetyenziswa kanye kuphela emva komthwalo we-bearing kwaye akufuneki isetyenziswe kwakhona.
Xa ukhetha okanye u-odola iimveliso, kufuneka kubonelelwe ngeenkcukacha kunye nomzekelo womqhubi ohambelanayo.
IKLAMP YOKUFA EYENZIWEYO I-HELIFORMED
Ii-dead-ends ze-Heliformed, ezenziwe ngentsimbi egqunywe yi-aluminium okanye intsimbi egqunywe yi-galvanized, zenzelwe ukwakhiwa kokusasazwa kwepali enye.
Amandla oomatshini ayahlangabezana neemfuno zee-primaries, ze-secondary, kunye neze-substation feeders.
Kucetyiswa ukuba i-heliformed dead-end isetyenziswe ngqo phezu kwe-conductor yeplastiki enejakethi (engagqunywanga ngelaphu).
Ii-dead-ends ezigqunywe ngejakethi nazo ziyacetyiswa kwi-conductor enxibe ijakethi. Ii-dead-ends ze-Heliformed zenzelwe ukubamba i-conductor ngokulinganayo ukuthintela ukugqwetheka kwe-conductor. Ikwabonelela ngoyilo olwahlukileyo olususa iibholiti, amantongomane, ii-washers kunye nezinye iindawo ezinokulahleka okanye zonakale ngexesha lokufakwa okanye xa zisebenza.
Ngexesha lokufakelwa, nangamaxesha onke, kufuneka kuthathwe unonophelo ukuze kuthintelwe ukugrumba okanye ukonakalisa uqweqwe lwe-Heliformed dead-end okanye i-conductor ngokwayo. Ii-Heliformed dead-ends akufuneki zisetyenziswe njengezixhobo; umzekelo ii-come-alongs, ii-puling-in grips, njl. Izixhobo azifuneki kwaye azicetyiswa ukufaka ii-Heliformed dead-ends, ngaphandle kokusetyenziswa kwe-hot stick.
Izinto eziqwalaselwayo kuKhuseleko
Le mveliso yenzelwe ukusetyenziswa kube kanye (kanye) kwaye yenzelwe ukusetyenziswa okuchaziweyo.
Le mveliso yenzelwe ukusetyenziswa ngabantu abaqeqeshiweyo kuphela. Le mveliso akufuneki isetyenziswe ngumntu ongaqhelananga nayo kwaye ongaqeqeshwanga ukuyisebenzisa.
Xa usebenza kwindawo yemigca enikwe amandla ngale mveliso, kufuneka ulumke ngakumbi ukuthintela ukudibana kombane ngengozi.
Ukuze usebenze kakuhle kwaye ukhuseleke, qiniseka ukuba ukhetha ubungakanani obufanelekileyo ngee-Armor Rods ezenziwe kwangaphambili kunye nee-clamps ngokobukhulu bee-conductors ngaphambi kokuba uyisebenzise.
Iziphelo ezifileyo zizixhobo ezichanekileyo. Ukuqinisekisa ukusebenza kakuhle, kufuneka zigcinwe kwiibhokisi phantsi kwesiciko kwaye ziphathwe ngononophelo.
IiDead ends zilula ukuzifakela, ngaphandle kwesidingo sescrewdriver sokwahlula iziphelo zeconductor, azidingi zixhobo zimbi, zifake ngesandla.
| inombolo yekhathalogu | Abaqhubi GB/T1179-83 LGJ/LGJF | Icandelo (mm²) | OD(mm) | Ubude | Iziqwenga |
| I-LNL-16/3 | 45658 | 45732 | 5.55 | 444 | 3 |
| I-LNL-25/4 | 45772 | 45772 | 6.86 | 546 | 3 |
| I-LNL-35/6 | 12936 | 12936 | 8.18 | 622 | 3 |
| I-LNL-50/8 | 18476 | 18476 | 9.6 | 685 | 3 |
| I-LNL-70/10 | 25842 | 25842 | 11.4 | 738 | 3 |
| I-LNL-95/15 | 95/15 | 95/15 | 13.61 | 876 | 4 |
| I-LNL-95/20 | 95/20 | 95/20 | 13.87 | 876 | 4 |
| I-LNL-120/7 | 120/7 | 120/7 | 14.5 | 876 | 4 |
| I-LNL-120/20 | 120/20 | 120/20 | 15.07 | 889 | 4 |
| I-LNL-120/25 | 120/25 | 120/25 | 15.74 | 889 | 4 |
| I-LNL-150/8 | 150/8 | 150/8 | 16 | 889 | 4 |
| I-LNL-150/20 | 150/20 | 150/20 | 16.87 | 1016 | 5 |
| I-LNL-150/25 | 150/28 | 150/28 | 17.1 | 1016 | 5 |
| I-LNL-150/35 | 150/35 | 150/35 | 17.6 | 1016 | 5 |
| I-LNL-185/10 | 185/10 | 185/10 | 18 | 1016 | 5 |
| I-LNL-185/25 | 185/25 | 185/25 | 18.88 | 1155 | 6 |
| I-LNL-185/30 | 185/30 | 185/30 | 19.9 | 1155 | 6 |
| I-LNL-185/45 | 185/45 | 185/45 | 19.6 | 1155 | 6 |
| I-LNL-210/10 | 210/10 | 210/10 | 19.6 | 1155 | 6 |
| I-LNL-210/25 | 210/25 | 210/25 | 19.98 | 1155 | 6 |
| I-LNL-210/35 | 210/35 | 210/35 | 20.88 | 1155 | 6 |
| I-LNL-210/50 | 210/50 | 210/50 | 20.38 | 1155 | 6 |
| I-LNL-240/30 | 240/30 | 240/30 | 21.6 | 1270 | 8 |
| I-LNL-240/40 | 240/40 | 240/40 | 21.66 | 1270 | 8 |
| I-LNL-300/15 | 300/15 | 300/15 | 23.04 | 1270 | 8 |
| I-LNL-300/20 | 300/20 | 300/20 | 23.43 | 1270 | 8 |
| I-LNL-300/25 | 300/25 | 300/25 | 23.76 | 1442 | 10 |
| I-LNL-300/40 | 300/40 | 300/40 | 26.94 | 1442 | 10 |
| I-LNL-300/50 | 300/50 | 300/50 | 24.26 | 1442 | 10 |
| inombolo yekhathalogu | umqhubi we-LJ GB/T1179-1983 | Ubude (mm) | ikhowudi yombala | |
| Icandelo (mm虏) | OD(mm) | |||
| I-LNL-16/LJ | 16 | 4.62-5.16 | 406 | luhlaza |
| I-LNL-25/LJ | 25 | 5.8-6.53 | 444 | orenji |
| I-LNL-35/LJ | 35 | 7.35-8.26 | 622 | bomvu |
| I-LNL-50/LJ | 50 | 8.27-9.25 | 685 | luhlaza |
| I-LNL-70/LJ | 70 | 10.4-11.28 | 736 | luhlaza |
| I-LNL-95/LJ | 95 | 11.69-13.11 | 800 | orenji |
| I-LNL-120/LJ | 120 | 13.12-14.66 | 876 | bomvu |
| I-LNL-150/LJ | 150 | 14.67-16.59 | 889 | mnyama |
| I-LNL-185/LJ | 185 | 16.6-18.77 | 1016 | luhlaza |
| I-LNL-210/LJ | 210 | 16.6-18.77 | 1016 | luhlaza |
| I-LNL-240/LJ | 240 | 18.78-21.26 | 1155 | orenji |
| I-LNL-300/LJ | 300 | 21.27-24.05 | 1270 | luhlaza |
| I-LNL-400/LJ | 400 | 24.06-27.2 | 1422 | ntsundu |
| I-LNL-500/LJ | 500 | 27.21-30.78 | 1651 | orenji |
Itheyibhile yoKhetho lweKlampu yoXinzelelo oluQinisekisiweyo lwe-10kV
| Imodeli yemveliso yenkampani | Imodeli yeStandard yoShishino | Uluhlu lobubanzi bomqhubi olusebenzayo (mm) | Imodeli yoMqhubi oSebenzayo s ye ≤1kV (GB12527-90) | Ubude beReferensi (mm) | Ikhowudi yoMbala | Izixhobo eziKhethekileyo | |
| Ubuncinci | Ubuninzi | ||||||
| I-LNL-10/JY-10KV | 10.4 | 11.68 | 10 | 740 | Luhlaza | I-STC-05-B | |
| I-LNL-16/JY-10KV | 11.69 | 13.11 | 16 | 790 | Orenji | ||
| I-LNL-25/JY-10KV | 13.12 | 14.66 | 25 | 860 | Mfusa | ||
| I-LNL-35/JY-10KV | NL-35/Wena | 14.67 | 16.59 | 35 | 690 | Luhlaza | |
| I-LNL-50/JY-10KV | NL-50/Wena | 50 | 889 | ||||
| I-LNL-70/JY-10KV | NL-70/Wena | 16.60 | 18.77 | 70 | Bomvu | ||
| I-LNL-95/JY-10KV | NL-95/Wena | 18.78 | 21.26 | 95 | 980 | Ntsundu | |
| I-LNL-120/JY-10KV | I-NL-120/Wena | 120 | 980 | I-STC-07-B | |||
| I-LNL-150/JY-10KV | I-NL-150/Wena | 21.27 | 24.05 | 150 | Luhlaza | ||
| I-LNL-185/JY-10KV | NL-185/Wena | 24.06 | 27.20 | 185 | 1016 | Mnyama | I-STC-10-B |
| I-LNL-240/JY-10KV | I-NL-240/Wena | 240 | |||||
| I-LNL-300/JY-10KV | I-NL-300/Wena | 27.21 | 30.78 | 300 | Mfusa | ||
Igrisi yokuqhuba esemgangathweni ophezulu ehambelana nocingo.
③ Kuvumelekile ukwenza amakhonkco eentambo kwimicu yokudibanisa ucingo. Ngaphambi kokufaka iikliphu ze-lap joint, iingcingo kufuneka zicocwe kakuhle kwaye zigqunywe ngegrisi eqhubayo. Kwangaxeshanye, umphezulu wangaphandle wemicu edibanisayo kufuneka ucocwe kakuhle ukuze kususwe naluphi na umaleko we-oxide kunye ne-adhesive enokubakho. Indawo ye-lap joint yemicu edibanisayo nayo kufuneka igqunywe ngegrisi eqhubayo.
Xa i-midpoint ye-connecting strand ihambelana ne-point eyonakeleyo kwi-wire ngexesha lokufakelwa, umgama phakathi kwe-tail end ye-connecting strand kunye ne-tail end ye-wire guards esele ifakiwe okanye i-short wire guards ezifakwe ngaphambili akufuneki ube ngaphantsi kwe-152 mm. Olu hlobo lwe-connecting strand lungasetyenziswa kuphela xa i-point eyonakeleyo ye-wire ikwi-support point okanye ngaphaya kwe-point eyonakeleyo ekufutshane, kwaye imisebenzi yokugcinwa kwe-strand edibeneyo ekhankanyiweyo apha ngasentla inokwenziwa.
Itheyibhile yoKhetho lweClamp yeNgxaki yoMbane oGround eyenziwe kwangaphambili yeSteel Strand
| Imodeli yemveliso yenkampani | Imodeli yeStandard yoShishino | Uluhlu lobubanzi bomqhubi olusebenzayo (mm) | Iintlobo zeConductor ezisebenzayo YB/T 5004-1993 (mm²) | Ubude beClamp yoBuchule (mm) | Ubunzima beClamp (kg) | Ikhowudi yoMbala | |
| I-LNL-25G | I-NL-25G | 6.60 | 25 | 635 | 0.22 | Lubhelu | |
| I-LNL-30G | 6.90 | 30 | 680 | 0.25 | Mfusa | ||
| I-LNL-35G | I-NL-35G | 7.80 | 35 | 711 | 0.30 | Mnyama | |
| I-LNL-45G | 8.70 | 45 | 760 | 0.40 | Luhlaza | ||
| I-LNL-50G | I-NL-50G | 9.00 | 50 | 901 | 0.53 | Orenji | |
| I-LNL-55G | 9.60 | 55 | 920 | 0.55 | Bomvu | ||
| I-LNL-60G | 10.00 | 60 | 950 | 0.65 | Mfusa | ||
| I-LNL-65G | 10.50 | 65 | 980 | 0.67 | Luhlaza | ||
| I-LNL-70G | I-NL-70G | 11.00 | 70 | 1016 | 0.82 | Luhlaza | |
| I-LNL-80G | 11.40 | 80 | 1170 | 0.96 | Mnyama | ||
| I-LNL-90G | 12.00 | 90 | 1180 | 1.30 | Bomvu | ||
| I-LNL-95G | I-NL-95G | 12.50 | 95 | 1333 | 1.50 | Orenji | |
| I-LNL-100G | I-NL-100G | 13.00 | 100 | 1333 | 1.50 | Lubhelu | |
| I-LNL-120G | I-NL-120G | 14.00 | 120 | 1460 | 2.22 | Lubhelu | |
I-Pole Guy Wire Clamp （SDL）
| Inombolo yesiriyeli | Iinkcukacha zeMveliso | Ulwakhiwo lweMveliso | Ubude beMveliso (mm) | Ikhowudi yoMbala | |
| 1 | I-LDL-7/2.4 | 7/2.403 | 2290 | Mnyama | |
| 2 | I-LDL-7/2.65 | 7/2.65 | 2290 | Ntsundu | |
| 3 | I-LDL-7/2.92 | 7/2.92 | 2290 | Bomvu | |
| 4 | I-LDL-7/3.25 | 7/3.25 | 2290 | Mnyama | |
| 5 | I-LDL-7/3.27 | 7/3.27 | 2290 | Mnyama | |
| 6 | I-LDL-7/3.35 | 7/3.35 | 2290 | Luhlaza | |
| 7 | I-LDL-7/3.36 | 7/3.56 | 2290 | Ntsundu | |
| 8 | I-LDL-7/4.0 | 7/4.0 | 2290 | Luhlaza | |
| 9 | I-LDL-19/2.65 | 19/2.65 | 2290 | Orenji | |
| 10 | I-LDL-19/3.25 | 19/3.25 | 2290 | Ntsundu | |
Itheyibhile yoKhetho lweClamp yeNgxaki yeNgxaki yeNsimbi yeAluminiyam eQokelelweyo
| Imodeli yeMveliso yeNkampani | Imodeli esemgangathweni yoShishino | Uluhlu lobubanzi bomqhubi olusebenzayo (mm) | Ubude beClamp (mm) | Ikhowudi yoMbala | |
| Ububanzi obuncinci bangaphandle | Ububanzi obuphezulu bangaphandle | ||||
| I-LNL-0460LB | - | 4.42 | 4.6 | 420 | Orenji |
| I-LNL-0585LB | - | 5.56 | 5.85 | 500 | Luhlaza |
| I-LNL-0600LB | - | 5.86 | 6.00 | 500 | Orenji |
| I-LNL-0628LB | - | 6.01 | 6.28 | 520 | Lubhelu |
| I-LNL-0656LB | - | 6.29 | 6.56 | 520 | Mnyama |
| I-LNL-0684LB | - | 6.57 | 6.84 | 540 | Bomvu |
| I-LNL-0712LB | - | 6.85 | 7.12 | 570 | Luhlaza |
| I-LNL-05740LB | - | 7.13 | 7.40 | 570 | Luhlaza |
| I-LNL-0767LB | - | 7.41 | 7.67 | 580 | Lubhelu |
| I-LNL-0795LB | - | 7.68 | 7.95 | 650 | Mnyama |
| I-LNL-0823LB | - | 7.96 | 8.23 | 650 | Bomvu |
| I-LNL-0854LB | - | 8.24 | 8.54 | 720 | Luhlaza |
| I-LNL-0869LB | - | 8.55 | 8.69 | 725 | Orenji |
| I-LNL-05902LB | - | 8.70 | 9.02 | 775 | Lubhelu |
| I-LNL-0925LB | - | 9.03 | 9.25 | 770 | Luhlaza |
| I-LNL-0963LB | - | 9.26 | 9.63 | 800 | Bomvu |
| I-LNL-1001LB | - | 9.64 | 10.01 | 840 | Orenji |
| I-LNL-1039LB | - | 10.02 | 10.39 | 850 | Lubhelu |
| I-LNL-1082LB | - | 10.40 | 10.82 | 900 | Mnyama |
| I-LNL-1123LB | - | 10.83 | 11.23 | 940 | Luhlaza |
| I-LNL-1166LB | - | 11.24 | 11.66 | 950 | Lubhelu |
| I-LNL-1204LB | - | 11.67 | 12.04 | 980 | Bomvu |
| I-LNL-1255LB | - | 12.05 | 12.55 | 1080 | Luhlaza |
| I-LNL-1308LB | - | 12.56 | 13.08 | 1190 | Luhlaza |
| I-LNL-1361LB | 70/40 | 13.09 | 13.61 | 1220 | Bomvu |
| I-LNL-1410LB | - | 13.62 | 14.10 | 1250 | Lubhelu |
| I-LNL-1448LB | - | 14.11 | 14.48 | 1270 | Luhlaza |
| I-LNL-1501LB | - | 14.19 | 15.01 | 1270 | Orenji |
| I-LNL-1554LB | - | 15.02 | 15.54 | 1370 | Luhlaza |
| I-LNL-1613LB | 95/55 | 15.55 | 16.13 | 1420 | Lubhelu |
| I-LNL-1679LB | - | 16.14 | 13.79 | 1500 | Mnyama |
| I-LNL-10742LB | - | 16.80 | 17.42 | 1530 | Luhlaza |
| I-LNL-1808LB | 120/7 | 17.43 | 18.08 | 1570 | Bomvu |
| I-LNL-1882LB | - | 18.09 | 18.82 | Mnyama | |
| I-LNL-1961LB | 18.83 | 19.61 | 1780 | Mfusa | |
I-Clamp yoKhuseleko oluSetyenzisiweyo kwangaphambili (SDG)
| Imodeli | Icandelo elinqamlezileyo (mm²) | Ububanzi obungaphandle boMqhubi (∅mm) | Ubude (mm) | Inani leeStrands | Ubunzima (GK) | Amagqabaza (I-Filler Strip) |
| I-LDG-9/20 | I-NL-50-900 | 7.8 | 900 | 5 | 0.76 | 7.8-800 |
| I-LDG-120/25 | I-NL-50-1100 | 9 | 880 | 5 | 0.76 | 9.0-800 |
| I-LDG-150/20 | I-NL-70-1400 | 10.8 | 1200 | 5 | 1.17 | 10.8-1050 |
| I-LDG-185/50 | I-NL-80-1300 | 11.8 | 1350 | 5 | 1.3 | 11.8-1150 |
| I-LDG-240/30 | I-NL-100-1600 | 13 | 1620 | 5 | 2.56 | 13.0-1500 |
| I-LDG-300/40 | I-NL-120-1800 | 14 | 1750 | 5 | 2.94 | 14.0-1600 |
| I-LDG-400/35 | I-NL-185-1900 | 17.5 | 1950 | 5 | 3.9 | 17.5-1720 |
| I-LDG-500/35 | I-NL-230-2180 | 19.6 | 2150 | 6 | 4.78 | 19.6-1900 |
| I-LDG-630/45 | I-NL-340-2670 | 24 | 2650 | 7 | 7.54 | 24.0-2400 |
I-Clamp yoKhuseleko lwe-Safety Backup Current
| Imodeli | Icandelo elinqamlezileyo (mm²) | Ububanzi bangaphandle boMqhubi (mm) | Ubude (mm) | Inani leeStrands | Ubunzima (GK) | Amagqabaza |
| I-LDG-9/20 | CS-9/20 | Φ13.79–Φ14.1 | 1480 | 12 | 0.63 | 4–3 |
| I-LDG-120/25 | CS-120/25 | Φ15.42–Φ15.74 | 1550 | 12 | 0.82 | 4–3 |
| I-LDG-150/20 | CS-150/20 | Φ16.5–Φ17.0 | 1800 | 12 | 1.21 | 4–3 |
| I-LDG-185/30 | CS-185/30 | Φ18.59–Φ19.79 | 2000 | 12 | 1.81 | 4–3 |
| I-LDG-240/30 | CS-240/30 | Φ21.48–Φ22.09 | 2200 | 12 | 2.36 | 4–3 |
| I-LDG-300/40 | CS-300/40 | Φ23.6–Φ24.6 | 2600 | 12 | 3.82 | 4–3 |
| I-LDG-400/35 | CS-400/35 | Φ26.43–Φ27.29 | 2800 | 12 | 4.5 | 4–3 |
| I-LDG-500/35 | CS-500/35 | Φ30.00 | 2900 | 12 | 6.1 | 4–3 |
| I-LDG-630/45 | CS-630/45 | Φ33.60 | 3300 | 12 | 7.59 | 4–3 |
I-Safety Backup Clamp eQinisekisiweyo ye-Splice Strip
| Imodeli | Icandelo elinqamlezileyo (mm²) | Ububanzi bangaphandle boMqhubi (mm) | Ubude (mm) | Inani leeStrands | Ubunzima (GK) | Amagqabaza |
| I-LDG-9/20 | LS-9/20 | Φ13.79–Φ14.1 | 1900 | 12 | 0.83 | 4–3 |
| I-LDG-120/25 | LS-120/25 | Φ15.42–Φ15.74 | 2100 | 12 | 1.07 | 4–3 |
| I-LDG-150/20 | LS-150/20 | Φ16.5–Φ17.0 | 2500 | 12 | 1.65 | 4–3 |
| I-LDG-185/30 | LS-185/30 | Φ18.59–Φ19.79 | 2500 | 12 | 2.24 | 4–3 |
| I-LDG-240/30 | LS-240/30 | Φ21.48–Φ22.09 | 2900 | 12 | 3.06 | 4–3 |
| I-LDG-300/40 | I-LS-300/40 | Φ23.6–Φ24.6 | 3450 | 12 | 5.1 | 4–3 |
| I-LDG-400/35 | I-LS-400/35 | Φ26.43–Φ27.29 | 4000 | 12 | 6.5 | 4–3 |
| I-LDG-500/35 | I-LS-500/35 | Φ30.00 | 4450 | 12 | 9.4 | 4–3 |
| I-LDG-630/45 | I-LS-630/45 | Φ33.60 | 5500 | 12 | 12.65 | 4–3 |
