+86 13777722188 
Qalabka Xakameynta Xiisadda ee Hore loo Sameeyay (SNL)
Astaamaha
Xoog Sare: Qaboojiyaha xiisadda ee koontaroole kasta wuxuu leeyahay dherer dheeraad ah oo hore loo qalloociyey, taasoo hubinaysa in xoogga ka horreeya xiisadda uu gaaro in ka badan 95% xoogga jebinta ee koontaroolaha (CU/JS).
Qaybinta Walwalka Isku Midka ah: Qalabkani wuxuu ka hortagaa inuu waxyeello u geysto qalabka korontada ku shaqeeya wuxuuna si siman u qaybiyaa walbahaarka, taasoo kor u qaadaysa awoodda ka hortagga gariirka qalabka korontada ku shaqeeya, cimrigiisana dheereyneysa.
Iska caabinta Daxalka ee aadka u Fiican: Maaddadu waxay si sax ah ula jaanqaadaysaa koontaroolaha, taasoo hubinaysa iska caabin xooggan oo daxalka ah.
Rakibaadda Fudud: Qalabka gacanta lagu rakibi karo si dhakhso leh oo fudud, iyada oo aan la isticmaalin qalab gaar ah - hal qof ayaa dhammaystiri kara hawsha.
Tayada Rakibaadda ee La Dammaanad Qaaday: Tayada rakibidda waa mid si fudud loo hubin karo, iyadoo leh joogteyn sare. Looma baahna tababar gaar ah, kormeerna waa la samayn karaa si muuqaal ah. Muuqaalku waa mid fudud oo qurux badan.
Kala duwanaansho xooggan: Ku habboon biraha kala duwan (fiiri buug-gacmeedka rakibidda wixii faahfaahin ah).
Xoogga Qabsashada Ku Filan: Qalabka qabsashada wuxuu leeyahay giraan adag oo qaloocan, kaasoo siinaya awood ku filan oo lagu qabto qalabka sida ACSR (bir la xoojiyay oo lagu xoojiyay qalabka korontada), fiilooyinka aluminiumka ah ee xaraashka leh, iyo fiilooyinka aluminiumka ah ee xaraashka leh. Waxa kale oo uu taageeraa cabbirro badan oo qalabka korontada ku shaqeeya.
Kala-soocidda Taxanaha
Qalabka Cadaadiska ee Horudhaca ah
Qalabka Xakameynta Fiilada Dhulka ee Hore loo sameeyay
Qalabka Xakameynta Xiisadda ee Hore loo Sameeyay ee loogu talagalay Khadadka Jiidashada
Sharaxaadda Qaybta
1. Sharaxaadda Qaybaha
① Wareeg nus-qalloocan: Naqshad caadi ah, oo ku habboon kontaroolayaasha dhexroorka yar yar.
Wareegga La Maroojiyey: Qalabka gudbiya dhexroorka weyn, wareegyada la maroojiyey waxay la qabsadaan noocyada kala duwan ee qalabka.
② Calaamadda rakibidda (lambarka midabka): Waxay calaamadeysaa meesha laga bilaabayo rakibidda waxayna ka caawisaa aqoonsashada qaabka isku-xidhka.
③ Calaamadda: Jaantuska Xisaabinta Xoogga Jiidista
Agabka
Qalabka waxaa laga sameeyay agab sida fiilooyinka birta galvanized, fiilooyinka birta aluminiumka lagu dahaadhay, fiilooyinka aluminiumka lagu dahaadhay, iyo fiilooyinka birta naxaasta lagu dahaadhay.
Qoraallo
Jihada leexashada ee qalabka isku xidha cadaadiska SNL (fiilooyinka dhulka/gudbiyeyaasha) waa inay ahaadaan kuwo isku mid ah. SNL-ka caadiga ah wuxuu leeyahay leexasho gacanta midig ah; haddii loo baahdo leexasho gacanta bidix ah, fadlan horay u qeex.
Qaab-dhismeedka gaarka ah ee qalabkan, qalab kasta waxaa la isticmaali karaa hal mar oo keliya ka dib marka la qaado xamuulka, waana in aan dib loo isticmaalin.
Marka la dooranayo ama la dalbanayo alaabada, qeexitaanka iyo qaabka hagaha u dhigma waa in la bixiyaa.
Qabsashada DEAD END ee Heliformed
Daboolka Heliformed dead-ends, oo laga sameeyay bir aluminium ah oo lagu dahaadhay ama bir galvanized ah, waxaa loogu talagalay dhismaha qaybinta hal-cirif.
Xoogga farsamoyaqaanku wuxuu buuxiyaa shuruudaha quudinta aasaasiga ah, kuwa labaad, iyo kuwa saldhigga hoose.
Heliformed dead-end ayaa lagula talinayaa in si toos ah loogu isticmaalo kondhoorka balaastikada ah ee jaakadaha leh (ee aan dharka lagu darin).
Qalabka dahaarka leh ee dahaarka leh ayaa sidoo kale lagula talinayaa qalabka dahaarka leh ee jaakadaha leh. Qalabka dahaarka leh ee Heliformed waxaa loogu talagalay inuu si isku mid ah u qabto qalabka dahaarka si looga hortago qallooca qalabka dahaarka leh. Waxa kale oo uu bixiyaa naqshad gaar ah oo baabi'isa boolal, laws, makiinado iyo qaybo kale oo ka mid ah qaybaha oo lumi kara ama dhaawacmi kara inta lagu jiro rakibidda ama adeegga.
Inta lagu jiro rakibidda, iyo mar walba, waa in taxaddar la muujiyaa si looga fogaado in la xoqo ama la waxyeeleeyo dahaarka Heliformed dead-end ama konductor-ka laftiisa. Heliformed dead-ends looma isticmaali karo qalab ahaan; tusaale ahaan come-alongs, puling-in-ga, iwm. Qalabka looma baahna mana lagu talinayo in lagu rakibo Heliformed dead-ends, marka laga reebo codsiyada hot stick.
Tixgelinta Badbaadada
Badeecadan waxaa loogu talagalay isticmaal hal mar ah (hal mar) iyo codsiga la cayimay
Badeecadan waxaa loogu talagalay in ay isticmaalaan dad xirfadlayaal ah oo tababaran oo keliya. Badeecadan waa in aysan isticmaalin qof aan aqoon u lahayn oo aan tababar u lahayn isticmaalka.
Marka aad ka shaqeyneyso aagga khadadka tamarta leh ee alaabtan, waa in taxaddar dheeraad ah la sameeyaa si looga hortago in koronto si kama' ah u taabato.
Si aad u hesho waxqabad habboon iyo badbaado shaqsiyeed, hubi inaad doorato cabbirka saxda ah oo leh Ulaha Hubka ee hore loo sameeyay iyo qabsatooyinka iyadoo loo eegayo cabbirka kontaroolayaasha ka hor intaadan isticmaalin.
Qalabka aan la taaban karin waa qalab sax ah. Si loo hubiyo waxqabadka saxda ah, waa in lagu kaydiyaa kartoonno daboolan oo si taxaddar leh loo maareeyaa.
Dhammaadka Dhimasho waa rakibid fudud, marka laga reebo baahida loo qabo kaashawiitada si loo kala saaro dhammaadka koontaroolaha, badanaa uma baahna qalab kale, kaliya ku rakib gacanta.
| lambarka buugga | Kondhiyeyaashu GB/T1179-83 LGJ/LGJF | Qaybta (mm²) | OD(mm) | Dhererka | Qaybo |
| LNL-16/3 | 45658 | 45732 | 5.55 | 444 | 3 |
| LNL-25/4 | 45772 | 45772 | 6.86 | 546 | 3 |
| LNL-35/6 | 12936 | 12936 | 8.18 | 622 | 3 |
| LNL-50/8 | 18476 | 18476 | 9.6 | 685 | 3 |
| LNL-70/10 | 25842 | 25842 | 11.4 | 738 | 3 |
| LNL-95/15 | 95/15 | 95/15 | 13.61 | 876 | 4 |
| LNL-95/20 | 95/20 | 95/20 | 13.87 | 876 | 4 |
| LNL-120/7 | 120/7 | 120/7 | 14.5 | 876 | 4 |
| LNL-120/20 | 120/20 | 120/20 | 15.07 | 889 | 4 |
| LNL-120/25 | 120/25 | 120/25 | 15.74 | 889 | 4 |
| LNL-150/8 | 150/8 | 150/8 | 16 | 889 | 4 |
| LNL-150/20 | 150/20 | 150/20 | 16.87 | 1016 | 5 |
| LNL-150/25 | 150/28 | 150/28 | 17.1 | 1016 | 5 |
| LNL-150/35 | 150/35 | 150/35 | 17.6 | 1016 | 5 |
| LNL-185/10 | 185/10 | 185/10 | 18 | 1016 | 5 |
| LNL-185/25 | 185/25 | 185/25 | 18.88 | 1155 | 6 |
| LNL-185/30 | 185/30 | 185/30 | 19.9 | 1155 | 6 |
| LNL-185/45 | 185/45 | 185/45 | 19.6 | 1155 | 6 |
| LNL-210/10 | 210/10 | 210/10 | 19.6 | 1155 | 6 |
| LNL-210/25 | 210/25 | 210/25 | 19.98 | 1155 | 6 |
| LNL-210/35 | 210/35 | 210/35 | 20.88 | 1155 | 6 |
| LNL-210/50 | 210/50 | 210/50 | 20.38 | 1155 | 6 |
| LNL-240/30 | 240/30 | 240/30 | 21.6 | 1270 | 8 |
| LNL-240/40 | 240/40 | 240/40 | 21.66 | 1270 | 8 |
| LNL-300/15 | 300/15 | 300/15 | 23.04 | 1270 | 8 |
| LNL-300/20 | 300/20 | 300/20 | 23.43 | 1270 | 8 |
| LNL-300/25 | 300/25 | 300/25 | 23.76 | 1442 | 10 |
| LNL-300/40 | 300/40 | 300/40 | 26.94 | 1442 | 10 |
| LNL-300/50 | 300/50 | 300/50 | 24.26 | 1442 | 10 |
| lambarka buugga | darawalka LJ GB/T1179-1983 | Dhererka (mm) | koodhka midabka | |
| Qaybta (mm虏) | OD(mm) | |||
| LNL-16/LJ | 16 | 4.62-5.16 | 406 | buluug |
| LNL-25/LJ | 25 | 5.8-6.53 | 444 | oranji |
| LNL-35/LJ | 35 | 7.35-8.26 | 622 | casaan |
| LNL-50/LJ | 50 | 8.27-9.25 | 685 | cagaar |
| LNL-70/LJ | 70 | 10.4-11.28 | 736 | buluug |
| LNL-95/LJ | 95 | 11.69-13.11 | 800 | oranji |
| LNL-120/LJ | 120 | 13.12-14.66 | 876 | casaan |
| LNL-150/LJ | 150 | 14.67-16.59 | 889 | madow |
| LNL-185/LJ | 185 | 16.6-18.77 | 1016 | cagaar |
| LNL-210/LJ | 210 | 16.6-18.77 | 1016 | cagaar |
| LNL-240/LJ | 240 | 18.78-21.26 | 1155 | oranji |
| LNL-300/LJ | 300 | 21.27-24.05 | 1270 | buluug |
| LNL-400/LJ | 400 | 24.06-27.2 | 1422 | bunni |
| LNL-500/LJ | 500 | 27.21-30.78 | 1651 | oranji |
Shaxda Xulashada Isku-xidhka Xiisadda ee 10kV ee Dahaaran
| Qaabka wax soo saarka shirkadda | Qaabka Warshadaha ee Nard | Kala duwanaanshaha Dhexroorka Kontoroolka ee Khuseeya (mm) | Moodeelka Hagaha ee Khuseeya s ee ≤1kV (GB12527-90) | Dhererka Tixraaca (mm) | Koodhka Midabka | Qalabka Ikhtiyaarka ah | |
| Ugu yaraan | Ugu badnaan | ||||||
| LNL-10/JY-10KV | 10.4 | 11.68 | 10 | 740 | Buluug | STC-05-B | |
| LNL-16/JY-10KV | 11.69 | 13.11 | 16 | 790 | Liin dhanaan | ||
| LNL-25/JY-10KV | 13.12 | 14.66 | 25 | 860 | Guduudan | ||
| LNL-35/JY-10KV | NL-35/Adiga | 14.67 | 16.59 | 35 | 690 | Buluug | |
| LNL-50/JY-10KV | NL-50/Adiga | 50 | 889 | ||||
| LNL-70/JY-10KV | NL-70/Adiga | 16.60 | 18.77 | 70 | Casaan | ||
| LNL-95/JY-10KV | NL-95/Adiga | 18.78 | 21.26 | 95 | 980 | Bunni | |
| LNL-120/JY-10KV | NL-120/Adiga | 120 | 980 | STC-07-B | |||
| LNL-150/JY-10KV | NL-150/Adiga | 21.27 | 24.05 | 150 | Cagaaran | ||
| LNL-185/JY-10KV | NL-185/Adiga | 24.06 | 27.20 | 185 | 1016 | Madow | STC-10-B |
| LNL-240/JY-10KV | NL-240/Adiga | 240 | |||||
| LNL-300/JY-10KV | NL-300/Adiga | 27.21 | 30.78 | 300 | Guduudan | ||
Dufan tayo sare leh oo gudbiya oo la jaanqaadaya fiilada.
③ Waxaa loo oggol yahay in lagu sameeyo isku-xidhka wareega ee xargaha isku xira. Kahor inta aan la rakibin qalabka isku xira wareega, fiilooyinka waa in si fiican loo nadiifiyaa oo lagu dahaadhaa dufan gudbiye. Isla mar ahaantaana, dusha sare ee xargaha isku xira waa in si fiican loo nadiifiyaa si looga saaro lakab kasta oo oksaydh ah iyo dhejis. Meesha isku-xidhka wareega ee xargaha isku xira ayaa sidoo kale loo baahan yahay in lagu dahaadho dufan gudbiye.
Marka bartamaha xarigga isku xidhka uu la jaanqaado barta dhaawacan ee fiilada inta lagu jiro rakibidda, masaafada u dhaxaysa dhammaadka dabada xarigga isku xidhka iyo dhammaadka dabada ee ilaalada siligga ee hore loo rakibay ama ilaalada siligga gaaban ee hore loo sameeyay waa inaysan ka yaraan 152 mm. Noocan xarigga isku xidhka ah waxaa la isticmaali karaa oo keliya marka barta dhaawacan ee fiilada ay ku taal barta taageerada ama ka baxsan barta dhaawacan ee ugu dhow, hawlaha dayactirka ee xarigga isku xidhkana la fulin karo.
Shaxda Xulashada Xakameynta Xaddiga Xargaha Dhulka ee Hore loo sameeyay ee loogu talagalay Xariga Birta
| Qaabka wax soo saarka shirkadda | Qaabka Warshadaha ee Nard | Kala duwanaanshaha Dhexroorka Kontoroolka ee Khuseeya (mm) | Noocyada Hagaha ee Khuseeya YB/T 5004-1993 (mm²) | Dhererka Qabsashada Tixraaca (mm) | Miisaanka Qabsashada (kg) | Koodhka Midabka | |
| LNL-25G | NL-25G | 6.60 | 25 | 635 | 0.22 | Jaalle | |
| LNL-30G | 6.90 | 30 | 680 | 0.25 | Guduudan | ||
| LNL-35G | NL-35G | 7.80 | 35 | 711 | 0.30 | Madow | |
| LNL-45G | 8.70 | 45 | 760 | 0.40 | Buluug | ||
| LNL-50G | NL-50G | 9.00 | 50 | 901 | 0.53 | Liin dhanaan | |
| LNL-55G | 9.60 | 55 | 920 | 0.55 | Casaan | ||
| LNL-60G | 10.00 | 60 | 950 | 0.65 | Guduudan | ||
| LNL-65G | 10.50 | 65 | 980 | 0.67 | Buluug | ||
| LNL-70G | NL-70G | 11.00 | 70 | 1016 | 0.82 | Cagaaran | |
| LNL-80G | 11.40 | 80 | 1170 | 0.96 | Madow | ||
| LNL-90G | 12.00 | 90 | 1180 | 1.30 | Casaan | ||
| LNL-95G | NL-95G | 12.50 | 95 | 1333 | 1.50 | Liin dhanaan | |
| LNL-100G | NL-100G | 13.00 | 100 | 1333 | 1.50 | Jaalle | |
| LNL-120G | NL-120G | 14.00 | 120 | 1460 | 2.22 | Jaalle | |
Qalabka Wire-ka ee Pole Guy (SDL)
| Lambarka Taxanaha | Qeexitaannada Badeecada | Qaab-dhismeedka Badeecada | Dhererka Badeecada (mm) | Koodhka Midabka | |
| 1 | LDL-7/2.4 | 7/2.403 | 2290 | Madow | |
| 2 | LDL-7/2.65 | 7/2.65 | 2290 | Bunni | |
| 3 | LDL-7/2.92 | 7/2.92 | 2290 | Casaan | |
| 4 | LDL-7/3.25 | 7/3.25 | 2290 | Madow | |
| 5 | LDL-7/3.27 | 7/3.27 | 2290 | Madow | |
| 6 | LDL-7/3.35 | 7/3.35 | 2290 | Buluug | |
| 7 | LDL-7/3.36 | 7/3.56 | 2290 | Bunni | |
| 8 | LDL-7/4.0 | 7/4.0 | 2290 | Cagaaran | |
| 9 | LDL-19/2.65 | 19/2.65 | 2290 | Liin dhanaan | |
| 10 | LDL-19/3.25 | 19/3.25 | 2290 | Bunni | |
Shaxda Xulashada Xidhmada Xakameynta Xiisadda Guy ee Hore loo sameeyay ee loogu talagalay Strand Birta Aluminium-Dahaadhka ah
| Qaabka Badeecada Shirkadda | Qaabka Heerka Warshadaha | Kala duwanaanshaha Dhexroorka Kontoroolka ee Khuseeya (mm) | Dhererka Qabsashada (mm) | Koodhka Midabka | |
| Dhexroorka ugu Yar ee Dibadda | Dhexroorka ugu Badan ee Dibadda | ||||
| LNL-0460LB | - | 4.42 | 4.6 | 420 | Liin dhanaan |
| LNL-0585LB | - | 5.56 | 5.85 | 500 | Cagaaran |
| LNL-0600LB | - | 5.86 | 6.00 | 500 | Liin dhanaan |
| LNL-0628LB | - | 6.01 | 6.28 | 520 | Jaalle |
| LNL-0656LB | - | 6.29 | 6.56 | 520 | Madow |
| LNL-0684LB | - | 6.57 | 6.84 | 540 | Casaan |
| LNL-0712LB | - | 6.85 | 7.12 | 570 | Buluug |
| LNL-05740LB | - | 7.13 | 7.40 | 570 | Cagaaran |
| LNL-0767LB | - | 7.41 | 7.67 | 580 | Jaalle |
| LNL-0795LB | - | 7.68 | 7.95 | 650 | Madow |
| LNL-0823LB | - | 7.96 | 8.23 | 650 | Casaan |
| LNL-0854LB | - | 8.24 | 8.54 | 720 | Cagaaran |
| LNL-0869LB | - | 8.55 | 8.69 | 725 | Liin dhanaan |
| LNL-05902LB | - | 8.70 | 9.02 | 775 | Jaalle |
| LNL-0925LB | - | 9.03 | 9.25 | 770 | Buluug |
| LNL-0963LB | - | 9.26 | 9.63 | 800 | Casaan |
| LNL-1001LB | - | 9.64 | 10.01 | 840 | Liin dhanaan |
| LNL-1039LB | - | 10.02 | 10.39 | 850 | Jaalle |
| LNL-1082LB | - | 10.40 | 10.82 | 900 | Madow |
| LNL-1123LB | - | 10.83 | 11.23 | 940 | Cagaaran |
| LNL-1166LB | - | 11.24 | 11.66 | 950 | Jaalle |
| LNL-1204LB | - | 11.67 | 12.04 | 980 | Casaan |
| LNL-1255LB | - | 12.05 | 12.55 | 1080 | Buluug |
| LNL-1308LB | - | 12.56 | 13.08 | 1190 | Cagaaran |
| LNL-1361LB | 70/40 | 13.09 | 13.61 | 1220 | Casaan |
| LNL-1410LB | - | 13.62 | 14.10 | 1250 | Jaalle |
| LNL-1448LB | - | 14.11 | 14.48 | 1270 | Buluug |
| LNL-1501LB | - | 14.19 | 15.01 | 1270 | Liin dhanaan |
| LNL-1554LB | - | 15.02 | 15.54 | 1370 | Cagaaran |
| LNL-1613LB | 95/55 | 15.55 | 16.13 | 1420 | Jaalle |
| LNL-1679LB | - | 16.14 | 13.79 | 1500 | Madow |
| LNL-10742LB | - | 16.80 | 17.42 | 1530 | Buluug |
| LNL-1808LB | 120/7 | 17.43 | 18.08 | 1570 | Casaan |
| LNL-1882LB | - | 18.09 | 18.82 | Madow | |
| LNL-1961LB | 18.83 | 19.61 | 1780 | Guduudan | |
Qalabka Kaydinta Badbaadada ee Hore loo Sameeyay (SDG)
| Moodel | Qaybta isgoyska (mm²) | Dhexroorka Dibadda ee Hardcore-ka (∅mm) | Dhererka (mm) | Tirada Xargaha | Miisaanka (GK) | Faallooyin (Xarigga Buuxinta) |
| LDG-9/20 | NL-50-900 | 7.8 | 900 | 5 | 0.76 | 7.8-800 |
| LDG-120/25 | NL-50-1100 | 9 | 880 | 5 | 0.76 | 9.0-800 |
| LDG-150/20 | NL-70-1400 | 10.8 | 1200 | 5 | 1.17 | 10.8-1050 |
| LDG-185/50 | NL-80-1300 | 11.8 | 1350 | 5 | 1.3 | 11.8-1150 |
| LDG-240/30 | NL-100-1600 | 13 | 1620 | 5 | 2.56 | 13.0-1500 |
| LDG-300/40 | NL-120-1800 | 14 | 1750 | 5 | 2.94 | 14.0-1600 |
| LDG-400/35 | NL-185-1900 | 17.5 | 1950 | 5 | 3.9 | 17.5-1720 |
| LDG-500/35 | NL-230-2180 | 19.6 | 2150 | 6 | 4.78 | 19.6-1900 |
| LDG-630/45 | NL-340-2670 | 24 | 2650 | 7 | 7.54 | 24.0-2400 |
Qalabka Kaydinta Badbaadada ee Qabsashada Hadda
| Moodel | Qaybta isgoyska (mm²) | Dhexroorka Dibadda ee Konduratorka (mm) | Dhererka (mm) | Tirada Xargaha | Miisaanka (GK) | Faallooyin |
| LDG-9/20 | CS-9/20 | Φ13.79–Φ14.1 | 1480 | 12 | 0.63 | 4–3 |
| LDG-120/25 | CS-120/25 | Φ15.42–Φ15.74 | 1550 | 12 | 0.82 | 4–3 |
| LDG-150/20 | CS-150/20 | Φ16.5–Φ17.0 | 1800 | 12 | 1.21 | 4–3 |
| LDG-185/30 | CS-185/30 | Φ18.59–Φ19.79 | 2000 | 12 | 1.81 | 4–3 |
| LDG-240/30 | CS-240/30 | Φ21.48–Φ22.09 | 2200 | 12 | 2.36 | 4–3 |
| LDG-300/40 | CS-300/40 | Φ23.6–Φ24.6 | 2600 | 12 | 3.82 | 4–3 |
| LDG-400/35 | CS-400/35 | Φ26.43–Φ27.29 | 2800 | 12 | 4.5 | 4–3 |
| LDG-500/35 | CS-500/35 | Φ30.00 | 2900 | 12 | 6.1 | 4–3 |
| LDG-630/45 | CS-630/45 | Φ33.60 | 3300 | 12 | 7.59 | 4–3 |
Qalabka Kaydinta Badbaadada ee La Xoojiyay ee Qalabka Kala-goysyada ah
| Moodel | Qaybta isgoyska (mm²) | Dhexroorka Dibadda ee Konduratorka (mm) | Dhererka (mm) | Tirada Xargaha | Miisaanka (GK) | Faallooyin |
| LDG-9/20 | LS-9/20 | Φ13.79–Φ14.1 | 1900 | 12 | 0.83 | 4–3 |
| LDG-120/25 | LS-120/25 | Φ15.42–Φ15.74 | 2100 | 12 | 1.07 | 4–3 |
| LDG-150/20 | LS-150/20 | Φ16.5–Φ17.0 | 2500 | 12 | 1.65 | 4–3 |
| LDG-185/30 | LS-185/30 | Φ18.59–Φ19.79 | 2500 | 12 | 2.24 | 4–3 |
| LDG-240/30 | LS-240/30 | Φ21.48–Φ22.09 | 2900 | 12 | 3.06 | 4–3 |
| LDG-300/40 | LS-300/40 | Φ23.6–Φ24.6 | 3450 | 12 | 5.1 | 4–3 |
| LDG-400/35 | LS-400/35 | Φ26.43–Φ27.29 | 4000 | 12 | 6.5 | 4–3 |
| LDG-500/35 | LS-500/35 | Φ30.00 | 4450 | 12 | 9.4 | 4–3 |
| LDG-630/45 | LS-630/45 | Φ33.60 | 5500 | 12 | 12.65 | 4–3 |
