+86 13777722188 
Strixxi ta' Splicing Preformati (SJL)
Istruzzjonijiet għall-Użu
① Għal wajers stranded tal-aluminju b'qalba tal-azzar, strixxi ta' splicing jirrestawraw is-saħħa tal-konduttur tal-aluminju iżda mhux dik tal-qalba tal-azzar. Jekk ikun hemm sinjali ta' ħsara fil-qalba tal-azzar, għandhom jintużaw strixxi ta' splicing b'tensjoni sħiħa.
② Il-kondutturi kollha (kemm jekk ġodda kif ukoll jekk użati) għandhom jitnaddfu u jiġu llustrati sewwa biex jitneħħa s-saff tal-ossidu sakemm ikun hemm wiċċ tleqq qabel ma jiġu installati l-istrixxi tal-isplicing. Griż konduttiv ta' kwalità għolja u adattat għall-konduttur għandu jiġi applikat fuq il-wiċċ tal-konduttur qabel l-installazzjoni.
③ It-twaħħil tal-wajers fuq l-istrixxi tat-twaħħil tal-kondutturi huwa permess. Qabel ma tinstalla l-klipps tat-twaħħil:
Lustra sew il-konduttur u applika griż konduttiv.
Lustrar kompletament il-wiċċ ta' barra tal-istrixxi tat-tqattigħ biex tneħħi kwalunkwe saff ta' ossidu jew kolla.
Applika wkoll griż konduttiv fuq iż-żona tat-tqattigħ tal-istrixxi.
④ Meta tinstalla l-istrixxa tal-isplicing bil-punt tan-nofs tagħha allinjat mal-punt tal-ħsara fuq il-konduttur:
Id-distanza mit-tarf tal-istrixxa tat-tgħaqqid sat-tarf tal-istrixxi ta' protezzjoni preformati diġà installati jew l-istrixxi ta' protezzjoni qosra preformati trid tkun ≥ 152mm.
Dan it-tip ta' strixxa ta' splicing (u l-funzjoni ta' tiswija tagħha) tista' tintuża biss jekk il-punt ta' ħsara tal-konduttur ikun f'punt ta' appoġġ jew lil hinn mill-eqreb punt ta' ħsara.
(Deskrizzjoni tal-illustrazzjoni:)
Punt ta' Appoġġ
Strixxi ta' Gwardja jew Strixxi ta' Gwardja Qosra
Strixxa tat-Tqattigħ
L-eqreb Punt ta' Ħsara
Distanza: >152mm)
⑤ Strixxi ta' splicing tal-kondutturi preformati huma ddisinjati għal xenarji speċifiċi u jistgħu jintużaw darba biss. Qatt terġa' tuża jew timmodifika l-prodott taħt l-ebda ċirkostanza.
Vireg tal-Armatura Preformati għal Konduttur tal-Aluminju Rinforzat bl-Azzar (ACSR) (SBL)
| Mudell tal-Prodott tal-Kumpanija | Mudell Standard tal-Industrija | Mudell ta' Konduttur Applikabbli | Dijametru ta' Barra tal-Istruttura tal-Konduttur (mm) | Tul tal-Morsa ta' Referenza (mm) | Dijametru ta' Wajer Uniku (mm) | Piż tal-Morsa (kg) | Kodiċi tal-Kulur |
| (b'referenza għal GB/T 1179-83/GB/T 1179-2017) | |||||||
| HL-35/6 | HL-35/6 | Ġun-35 | 8.16 | 1100 | 3 | 0.22 | Aħmar |
| HL-50/8 | HL-50/8 | Aww-50 | 8.16 | 1270 | 3 | 0.3 | Aħmar |
| HL-95/15 | HL-95/15 | 95/15 | 13.41 | 1270 | 3.6 | 0.3 | Isfar |
| HL-95/20 | HL-95/20 | 95/20 | 13.67 | 1400 | 3.6 | 0.55 | Isfar |
| HL-95/55 | HL-95/55 | 95/55 | 16.8 | 1500 | 3.6 | 0.7 | Aħmar |
| HL-120/7 | HL-120/7 | 120/7 | 14.4 | - | - | 0.58 | Abjad |
| HL-120/20 | HL-120/20 | 120/20 | 15.07 | 1400 | 3.6 | 0.63 | Kannella |
| HL-120/70 | HL-120/70 | 120/70 | 15.74 | - | - | 0.63 | Aħmar |
| HL-150/8 | HL-150/8 | 150/8 | 16 | 1800 | 4.6 | 0.75 | Kannella |
| HL-150/20 | HL-150/20 | 150/20 | 16.47 | 1500 | 3.6 | 0.7 | Aħmar |
| HL-150/25 | HL-150/25 | 150/25 | 17.1 | 1500 | 3.6 | 0.75 | Blu |
| HL-150/35 | HL-150/35 | 150/35 | 17.5 | - | - | - | - |
| HL-185/10 | HL-185/10 | 185/10 | 18-il sena | - | - | 1.28 | Isfar |
| HL-185/25 | HL-185/25 | 185/25 | 18.9 | - | - | 1.3 | Abjad |
| HL-185/30 | HL-185/30 | 185/30 | 18.58 | - | - | 1.31 | Kannella |
| HL-185/45 | HL-185/45 | 185/45 | 19.6 | 1800 | 4.6 | 1.3 | Abjad |
| HL-210/10 | HL-210/10 | 210/10 | 19.98 | - | - | 1.31 | Roża |
| HL-210/25 | HL-210/25 | 210/25 | 20.28 | - | - | - | - |
| HL-210/35 | HL-210/35 | 210/35 | 20.86 | - | - | - | - |
| HL-240/08 | HL-240/08 | 240/08 | 21.46 | 1900 | 4.6 | 1.53 | Blu |
| HL-240/30 | HL-240/30 | 240/30 | 22 | - | - | - | - |
| HL-240/55 | HL-240/55 | 240/55 | 22.46 | - | - | - | Aħdar |
| HL-300/15 | HL-300/15 | 300/15 | 23.01 | 2000 | 6.3 | 2.26 | Iswed |
| HL-300/20 | HL-300/20 | 300/20 | 23.43 | 2000 | 6.3 | 2.44 | Abjad |
| HL-300/25 | HL-300/25 | 300/25 | 23.76 | 2000 | 6.3 | 2.46 | Kannella |
| HL-300/50 | HL-300/50 | 300/50 | 24.26 | 2000 | 6.3 | 2.48 | Roża |
| HL-300/70 | HL-300/70 | 300/70 | 25.2 | 2000 | 6.3 | 2.9 | Blu |
| HL-400/20 | HL-400/20 | 400/20 | 26.81 | 2200 | 6.3 | 3 | Aħdar |
| HL-400/35 | HL-400/35 | 400/35 | 26.92 | 2200 | 6.3 | 3.1 | Aħdar-Isfar |
| HL-400/50 | HL-400/50 | 400/50 | 27.14 | 2200 | 6.3 | 3.1 | Abjad |
| HL-400/95 | HL-400/95 | 400/95 | 28 sena | 2500 | 6.3 | 3.77 | Kannella |
| HL-500/35 | HL-500/35 | 500/35 | 30 | 2500 | 6.3 | - | - |
| HL-500/45 | HL-500/45 | 500/45 | 30 | 2500 | 6.3 | - | - |
| HL-630/45 | HL-630/45 | 630/45 | 33.6 | 2500 | 7.8 | 5.1 | Vjola |
| HL-630/55 | HL-630/55 | 630/55 | 34.23 | 2500 | 7.8 | 5.4 | Iswed |
| HL-630/80 | HL-630/80 | 630/80 | 38.8 | 2500 | 7.8 | 5.4 | Iswed |
| HL-800/55 | HL-800/55 | 800/55 | 38.4 | 2500 | 7.8 | 6.1 | Aħmar |
| HL-800/70 | HL-800/70 | 800/70 | 38.98 | 2500 | 7.8 | 6.1 | Blu |
| HL-800/100 | HL-800/100 | 800/100 | 38.98 | 2500 | 7.8 | 12.28 | Blu |
Tabella tal-Għażla ta' Vireg tal-Armatura Preformati għal Konnessjoni ta' Wajer Stranded tal-Aluminju
| Mudell tal-prodott tal-kumpanija | Mudell standard tal-industrija | Dijametru tal-konduttur applikabbli (mm) | Tip ta' konduttur applikabbli (GB1179 - 83) | Mudell Standard tal-Industrija | Tul tal-Morsa ta' Referenza (mm) | Piż tal-Morsa (kg) | Kodiċi tal-Kulur |
| Minimu | Massimu | ||||||
| JLD-16L | 4.91 | 5.13 | 16 | 558 | 0.08 | Blu | |
| JLD-25L | 6.26 | 6.53 | 25 | 660 | 0.1 | Blu - oranġjo | |
| JLD-35L | 7.35 | 7.57 | 35 sena | 710 | 0.12 | Vjola | |
| JLD - 50L | 8.94 | 9.32 | 50 | 860 | 0.19 | Vjola | |
| JLD-70L | 10.22 | 10.8 | 70 | 1020 | 0.32 | Kannella | |
| JLD-95L | JL-95LJ | 12.54 | 12.78 | 95 | 1168 | 0.44 | Roża |
| JLD-120L | JL-120LJ | 13.83 | 14.4 | 120 | 1321 | 0.6 | Aħmar |
| JLD - 150L | JL-150LJ | 15.72 | 16.36 | 150 | 1792 | 1.05 | Isfar |
| JLD-185L | JL-185LJ | 17.05 | 17.78 | 185 | 1778 | 1.24 | Isfar - aħdar |
| JLD-210L | JL-210LJ | 18.53 | 19.3 | 210 | 2007 | 1.9 | Iswed |
| JLD-240L | JL-240LJ | 19.91 | 20.12 | 240 | 2108 | 2.18 | Vjola |
| JLD-300L | JL-300LJ | 21.62 | 22.5 | 300 | 2515 | 2.84 | Blu - oranġjo |
| JLD-400L | JL-400LJ | 25.62 | 26.67 | 400 | 3073 | 4.56 | Aħdar |
| JLD-500L | JL-500LJ | 27.71 | 30.05 | 500 | 3451 | 6.5 | Aħmar |
Nota: Tifsira tal-ittri u n-numri fil-mudelli fit-tabella: J - Virga tal-armatura; L - Virga tal-armatura preformata spirali; D - Wajer, numru - Speċifikazzjoni tal-prodott; LJ - Wajer tal-aluminju stranded.
Tabella tal-Għażla ta' Vireg tal-Armatura Preformati għall-Azzar - Tiswija ta' Wajer tal-Aluminju Msaħħa
| Mudell tal-Prodott tal-Kumpanija | Mudell Standard tal-Industrija | Tip ta' Konduttur Applikabbli (GB1179 - 83) Azzar - Wajer tal-Aluminju Rinforzat LGJ, LGJF | Tul ta' Referenza (mm) | Dijametru tal-Wajer (mm) | Piż tal-Wajer (Kg) | Kodiċi tal-Kulur | |
| Mudell tal-Konduttur | Dijametru ta' Barra | ||||||
| BL - 70/10 | BL - 70/10 | Ott-70 | 11.4 | 420 | 3.6 | 0.14 | Aħmar |
| BL - 95/15 | BL - 95/15 | 95/15 | 13.41 | 0.18 | Isfar | ||
| BL - 95/20 | BL - 95/20 | 95/20 | 13.57 | 0.18 | Iswed | ||
| BL - 95/55 | BL - 95/55 | 95/55 | 16.8 | 450 | 0.2 | Aħmar | |
| BL - 120/7 | BL - 120/7 | 120/7 | 14.2 | 3.6 | 0.2 | Abjad | |
| BL - 120/20 | BL - 120/20 | 120/20 | 15.07 | 0.22 | Blu - abjad | ||
| BL - 120/25 | BL - 120/25 | 120/25 | 15.74 | 0.22 | Kannella | ||
| BL - 120/70 | BL - 120/70 | 120/70 | 18-il sena | 480 | 0.36 | Aħmar | |
| BL - 150/8 | BL - 150/8 | 150/8 | 16 | 3.6 | 0.32 | Isfar - aħdar | |
| BL - 150/20 | BL - 150/20 | 150/20 | 16.77 | 0.24 | Blu | ||
| BL - 150/25 | BL - 150/25 | 150/25 | 17.1 | 0.24 | Blu | ||
| BL - 150/35 | BL - 150/35 | 150/35 | 17.9 | 560 | 0.24 | Isfar | |
| BL - 185/10 | BL - 185/10 | 185/10 | 18.5 | 4.6 | 0.4 | Blu - aħdar | |
| BL - 185/20 | BL - 185/20 | 185/20 | 18.8 | 0.4 | Abjad | ||
| BL - 185/25 | BL - 185/25 | 185/25 | 19.3 | 0.41 | Abjad | ||
| BL - 185/45 | BL - 185/45 | 185/45 | 19.4 | 600 | 0.41 | Kannella | |
| BL - 210/10 | BL - 210/10 | 210/10 | 19.7 | 4.6 | 0.42 | Abjad | |
| BL - 210/25 | BL - 210/25 | 210/25 | 20.38 | 0.42 | Vjola | ||
| BL - 210/55 | BL - 210/55 | 210/55 | 21.86 | 0.45 | Kannella | ||
| BL - 240/30 | BL - 240/30 | 240/30 | 21.6 | 650 | 4.6 | 0.53 | Blu |
| BL - 240/40 | BL - 240/40 | 240/40 | 22.6 | Blu - aħdar | |||
| BL - 300/15 | BL - 300/15 | 300/15 | 23.4 | 6.3 | 1.22 | Aħdar | |
| BL - 300/25 | BL - 300/25 | 300/25 | 23.73 | 1000 | Iswed | ||
| BL - 300/40 | BL - 300/40 | 300/40 | 25.24 | 1.33 | Abjad | ||
| BL - 300/50 | BL - 300/50 | 300/50 | 25.7 | 1.3 | Kannella | ||
| BL - 300/70 | BL - 300/70 | 300/70 | 27.52 | 1.33 | Blu - oranġjo | ||
| BL - 400/20 | BL - 400/20 | 400/20 | 26.91 | 6.3 | 1.32 | Blu | |
| BL - 400/25 | BL - 400/25 | 400/25 | 26.64 | ||||
| BL - 400/35 | BL - 400/35 | 400/35 | 26.68 | 6.3 | 1.45 | Blu - aħdar | |
| BL - 400/50 | BL - 400/50 | 400/50 | 27.83 | 1.46 | Blu | ||
| BL - 400/65 | BL - 400/65 | 400/65 | 28.14 | 1100 | Isfar | ||
| BL - 400/95 | BL - 400/95 | 400/95 | 30 | 1.5 | Blu - aħdar | ||
| BL - 500/35 | BL - 500/35 | 500/35 | 30 | 1.66 | Kannella | ||
| BL - 500/45 | BL - 500/45 | 500/45 | 30.3 | Oranġjo | |||
| BL - 500/65 | BL - 500/65 | 500/65 | 31.6 | 7.8 | Vjola | ||
| BL - 630/45 | BL - 630/45 | 630/45 | 33.4 | 1500 | 2.62 | Isfar - aħdar | |
Vireg tal-Armatura Preformati għall-Azzar - Konnessjoni tal-Wajer tal-Aluminju Msaħħa
Tabella tal-Għażla ta' Vireg tal-Armatura Preformati għall-Azzar - Konnessjoni ta' Wajer tal-Aluminju Msaħħa
| Mudell tal-Prodott tal-Kumpanija | Dijametru tal-Konduttur Applikabbli (mm) | Azzar - Wajer tal-Aluminju Msaħħaħ LGJ/LGJF | Tul ta' Referenza (mm) | Tagħbija Tensili (kN) | Kodiċi tal-Kulur | |
| Minimu | Massimu | |||||
| JLD - 16/2 | 4.59 | 4.67 | 16 ta' Frar | 530 | 0.65 | Vjola |
| JLD - 16/3 | 5.39 | 5.56 | 16 ta' Marzu | 530 | 0.65 | Aħdar |
| JLD - 25/4 | 6.88 | 7.11 | 25 ta' April | 680 | 0.85 | Aħmar |
| JLD - 35/6 | 7.9 | 8.26 | Ġun-35 | 740 | 0.11 | Isfar |
| JLD - 50/8 | 8.94 | 9.32 | Aww-50 | 860 | 0.17 | Aħdar |
| JLD - 50/17 | 10.52 | 10.8 | 50/17 | 970 | 0.25 | Kannella |
| JLD - 70/10 | 11.28 | 11.73 | Ott-70 | 1020 | 0.35 | Blu |
| JLD - 70/18 | 12.24 | 12.78 | 70/18 | 1168 | 0.42 | Kannella |
| JLD - 70/40 | 13.26 | 13.82 | 70/40 | 1300 | 0.6 | Iswed |
| JLD - 95/15 | 13.83 | 14.4 | 95/15 | 1321 | 0.6 | Aħmar |
| JLD - 120/7 | 14.41 | 15.09 | 120/7 | 550 | 0.87 | Blu |
| JLD - 120/20 | 120/20 | |||||
| JLD - 120/25 | 15.72 | 16.36 | 120/25 | 1792 | 1.65 | Isfar |
| JLD - 150/8 | 16.37 | 17.04 | 150/8 | 1750 | 1.24 | Kannella |
| JLD - 150/20 | 17.35 | 17.68 | 150/20 | 1778 | 1.26 | Kannella |
| JLD - 150/25 | 17.79 | 18.52 | 150/25 | 1960 | 1.88 | Aħdar |
| JLD - 185/10 | 18.53 | 19.3 | 185/10 | 2007 | 1.84 | Iswed |
| JLD - 185/30 | 185/30 | |||||
| JLD - 185/40 | 19.31 | 20.12 | 185/40 | 2108 | 2.18 | Vjola |
| JLD - 210/25 | 210/25 | 2130 | 2.2 | Aħmar | ||
| JLD - 210/35 | 20.17 | 20.96 | 210/35 | 2180 | 2.26 | Blu |
| JLD - 240/30 | 20.93 | 21.61 | 240/30 | 2515 | 2.84 | Kannella |
| JLD - 240/55 | 21.62 | 22.5 | 240/55 | |||
| JLD - 300/15 | 22.51 | 23.6 | 300/15 | 2670 | 3.84 | Kannella |
| JLD - 300/20 | 300/20 | |||||
| JLD - 300/25 | 23.61 | 24.59 | 300/25 | 2740 | 4.2 | Kannella |
| JLD - 300/40 | 24.6 | 25.6 | 300/40 | 2820 | 4.42 | Isfar |
| JLD - 300/70 | 300/70 | |||||
| JLD - 400/25 | 25.61 | 26.71 | 400/25 | 3073 | 4.81 | Aħdar |
| JLD - 400/35 | 26.68 | 27.67 | 400/35 | 3230 | 5.56 | Iswed |
| JLD - 400/65 | 27.72 | 28.87 | 400/65 | 3480 | 7.44 | Vjola |
| JLD - 400/95 | 28.88 | 30.05 | 400/95 | 3581 | 6.76 | Aħmar |
| JLD - 500/35 | 500/35 | |||||
| JLD - 500/45 | 30.06 | 32.1 | 500/45 | 3630 | 7.85 | Blu |
Tabella tal-Għażla ta' Vireg tal-Armatura Preformati għas-Suppliment tas-Saħħa tal-Kmiem tal-Iċċattjar tal-Wajer tal-Art tal-Azzar Strand
| Mudell tal-Prodott tal-Kumpanija | Dijametru tal-Konduttur Applikabbli (mm) | Tip ta' Konduttur Applikabbli (GB1200 - 88) | Mudell tal-Kmiem tat-Tqattigħ | Tul Massimu tal-Kmiem tal-Iċċattjar (mm) | Tul ta' Referenza (mm) | Piż tal-Wajer (Kg) | |
| Minimu | Massimu | Strand tal-Azzar (GJ) | |||||
| JLB - 35G | 7.4 | 8 | 35 sena | INT - 35G | 300 | 1790 | 0.75 |
| JLB - 50G | 8.7 | 9.1 | 50 | INT - 50G | 240 | 1900 | 0.95 |
| JLB - 70G | 10.5 | 11.1 | 70 | INT - 70G | 290 | 2400 | 2.1 |
| JLB - 80G | 11.4 | 11.8 | 80 | INT - 80G | 260 | 2330 | 1.9 |
| JLB - 100G | 12.9 | 13.3 | 100 | INT - 100G | 320 | 3270 | 4 |
| JLB - 120G | 14-il sena | 14.7 | 120 | 640 | 3520 | 5.4 | |
Tabella tal-Għażla ta' Vireg tal-Armatura Preformati għat-Titjib tas-Saħħa tal-Kmiem tal-Iċċattjar tal-Kondutturi
| Mudell tal-Prodott tal-Kumpanija | Firxa tad-Dijametru tal-Konduttur Applikabbli (mm) | Tip ta' Konduttur Applikabbli (GB1179 - 83) | Mudell tal-Kmiem tat-Tqattigħ | Tul Massimu tal-Kmiem tal-Iċċattjar (mm) | Tul ta' Referenza (mm) | Piż tal-Wajer (Kg) | |||
| Minimu | Massimu | Azzar - Wajer tal-Aluminju Msaħħaħ LGJ/LGJF | Mudell tal-Kmiem tat-Tqattigħ | Wajer tal-aluminju stranded LJ | |||||
| JLB-3101 | 12.24 | 12.78 | - | - | 95 | JT-95L | 280 | 1470 | 0.5 |
| JLB-3103 | 13.26 | 13.82 | 95/15 | JT | - | - | 600 | 2010 | 0.9 |
| JLB-3104 | 13.83 | 14.4 | 95/20 | JT | - | - | 600 | 2040 | 0.9 |
| JLB-3106 | 14.41 | 15.09 | 120/20 | JYJTB | - | - | 490 | 2060 | 1.1 |
| JLB-3107 | 15.72 | 16.36 | 120/25 | INTI | 150 | JT/JY - 150L | 430 | 2060 | 1.2 |
| JLB-3108 | 16.37 | 17.04 | 150/20 | JYJTB | - | - | 470 | 2250 | 1.5 |
| JLB-3109 | 17.05 | 17.74 | 160/20, 185/35 | JYJTB | 185 | JT/JY - 185L | 570 | 2220 | 1.5 |
| JLB-3111 | 18.53 | 19.3 | 185/25, 185/30 | JYJTB | 210 | INT - 210L | 540 | 2210 | 2.3 |
| JLB-3112 | 19.31 | 20.12 | 185/45, 210/25 | JYJTB | 240 | INT - 240L | 570 | 2550 | 2.6 |
| JLB-3113 | 20.17 | 20.96 | 210/35, 210/50 | JYJTB | - | - | 600 | 2760 | 2.8 |
| JLB-3114 | 20.93 | 21.61 | 240/30, 240/40 | JYJTB | - | - | 570 | 2830 | 2.7 |
| JLB-3115 | 21.62 | 22.5 | 240/40, 240/55 | JYJYD | 300 | INT - 300L | 640 | 3090 | 3.4 |
| JLB-3116 | 22.51 | 23.6 | 300/15, 300/25 | JYJYD | - | - | 580 | 3180 | 4.5 |
| JLB-3117 | 23.61 | 24.59 | 300/25, 300/40, 300/50 | JYJYD | - | - | 660 | 3410 | 5.2 |
| JLB-3118 | 24.6 | 25.6 | 300/70 | JYJYD | - | - | 620 | 3570 | 5.6 |
| JLB-3119 | 25.61 | 26.67 | 400/25 | JYJYD | 400 | INT - 400L | 730 | 3770 | 5.9 |
| JLB-3120 | 26.68 | 27.71 | 400/35, 400/50 | JYJYD | - | - | 730 | 4000 | 6.7 |
| JLB-3121 | 27.72 | 28.87 | 400/95 | JYJYD | - | - | 760 | 4280 | 9.2 |
| JLB-3122 | 28.88 | 30.05 | 400/95, 500/35, 500/45 | JYJYD | 500 | INT - 500L | 830 | 4460 | 9.7 |
Din il-lista tinkludi biss xi prodotti. Għal prodotti oħra, jekk jogħġbok ikkonsulta l-kumpanija.
Tabella tal-Għażla ta' Vireg tal-Armatura Preformati għat-Tisħiħ tal-Kmiem tal-Iċċattjar tal-Kondutturi
| Mudell tal-Prodott tal-Kumpanija | Firxa tad-Dijametru tal-Konduttur Applikabbli (mm) | Tip ta' Konduttur Applikabbli (GB1179 - 83) | Tul Massimu tal-Kmiem tal-Iċċattjar (mm) | Tul ta' Referenza (mm) | Piż tal-Wajer (Kg) | ||||
| Minimu | Massimu | Azzar - Wajer tal-Aluminju Msaħħaħ LGJ/LGJF | Mudell tal-Kmiem tat-Tqattigħ | Wajer tal-aluminju stranded LJ | Mudell tal-Kmiem tat-Tqattigħ | ||||
| JLB-3101 | 12.24 | 12.78 | - | - | 95 | JT-95L | 280 | 1470 | 0.5 |
| JLB-3103 | 13.26 | 13.82 | 95/15 | JT | - | - | 600 | 2010 | 0.9 |
| JLB-3104 | 13.83 | 13.44 | 95/20 | JT | - | - | 600 | 2040 | 0.9 |
| JLB-3105 | 14.41 | 15.09 | 120/20 | JYJTB | - | - | 430 | 2080 | 1.1 |
| JLB-3107 | 15.72 | 16.36 | 120/25 | INTI | 150 | JT/JY - 150L | 470 | 2260 | 1.2 |
| JLB-3108 | 16.37 | 17.04 | 150/20 | JYJTB | - | - | 490 | 2250 | 1.5 |
| JLB-3109 | 17.05 | 17.78 | 150/25, 180/35 | JYJTB | 185 | JT/JY - 185L | 530 | 2220 | 1.5 |
| JLB-3111 | 18.53 | 19.3 | 185/25, 185/30 | JYJTB | 210 | INT - 210L | 540 | 2210 | 2.3 |
| JLB-3112 | 19.31 | 20.12 | 185/45, 210/25 | JYJTB | 240 | INT - 240L | 570 | 2550 | 2.6 |
| JLB-3113 | 20.17 | 20.96 | 210/35, 210/50 | JYJTB | - | - | 600 | 2760 | 2.8 |
| JLB-3114 | 20.93 | 21.61 | 240/30, 240/40 | JYJTB | - | - | 570 | 2830 | 2.7 |
| JLB-3115 | 21.62 | 22.5 | 240/40, 240/55 | JYJTB | 300 | INT - 300L | 640 | 3090 | 3.4 |
| JLB-3116 | 22.51 | 23.6 | 300/15, 300/20 | JYJYD | - | - | 580 | 3180 | 4.5 |
| JLB-3117 | 23.61 | 24.59 | 300/25, 300/40, 300/50 | JYJYD | - | - | 660 | 3410 | 5.2 |
| JLB-3118 | 24.6 | 25.6 | 300/70 | JYJYD | - | - | 620 | 3570 | 5.6 |
| JLB-3119 | 25.61 | 26.67 | 400/25 | JYJYD | 400 | INT - 400L | 730 | 3770 | 5.9 |
| JLB-3120 | 26.68 | 27.71 | 400/35, 400/50 | JYJYD | - | - | 730 | 4000 | 6.7 |
| JLB-3121 | 27.72 | 28.87 | 400/95 | JYJYD | - | - | 760 | 4280 | 9.2 |
| JLB-3122 | 28.88 | 30.05 | 400/95, 500/35, 500/45 | JYJYD | 500 | INT - 500L | 830 | 4460 | 9.7 |
Din il-lista tinkludi biss xi prodotti. Għal prodotti oħra, jekk jogħġbok ikkonsulta l-kumpanija.
Tabella tal-Għażla ta' Vireg tal-Armatura Preformati għat-Tisħiħ tal-Kmiem tal-Iċċattjar tal-Wajer tal-Art tal-Azzar
| Mudell tal-Prodott tal-Kumpanija | Firxa tad-Dijametru tal-Konduttur Applikabbli (mm) | Tip ta' Konduttur Applikabbli (GB1200 - 88) | Mudell tal-Kmiem tat-Tqattigħ | Tul Massimu tal-Kmiem tal-Iċċattjar (mm) | Tul ta' Referenza (mm) | Piż tal-Wajer (Kg) | |
| Minimu | Massimu | Strand tal-Azzar (GJ) | |||||
| JLB - 35G | 7.4 | 8 | 35 sena | INT - 35G | 300 | 1790 | 0.75 |
| JLB - 50G | 8.7 | 9.1 | 50 | INT - 50G | 240 | 1900 | 0.95 |
| JLB - 70G | 10.5 | 11.1 | 70 | INT - 70G | 290 | 2400 | 2.1 |
| JLB - 80G | 11.4 | 11.8 | 80 | INT - 80G | 260 | 2330 | 1.9 |
| JLB - 100G | 12.9 | 13.3 | 100 | INT - 100G | 320 | 3270 | 4 |
Strixxi ta' Splicing tal-Kondutturi Preformati (SJLD)
Ⅰ. Deskrizzjoni tal-Komponent
① Strixxi miġbura: Ġeneralment magħmula minn 2, 3, jew 4 settijiet ta' wajers preformati, bil-wiċċ ta' ġewwa sandblasted.
② Marka tal-installazzjoni: Kuluri differenti jiddistingwu l-mudelli tal-prodott; marki jsiru wkoll fiċ-ċentru tal-prodott bħala gwidi tal-installazzjoni għal assemblaġġ aktar faċli.
③ Tikketta: Tindika l-mudell tal-prodott u l-ispeċifikazzjonijiet tal-konduttur applikabbli.
④ Tul: Irreferi għat-tabella tal-għażla għad-dettalji.
Skop
Strixxi ta' splicing ta' kondutturi preformati huma ddisinjati biss bħala komponenti ta' konnessjoni esterna indipendenti għal linji ta' vultaġġ għoli (
Tabella tal-Għażla tat-Tip għal Kits ta' Splice Preformati b'Tensjoni Sħiħa (SJLD)
| Numru tal-Mudell tal-Prodott tal-Kumpanija | Numru tal-Mudell Standard tal-Industrija | Tip ta' Konduttur Applikabbli | Tul tal-Isplice ta' Referenza (mm) | Piż tal-Isplice (kg) | |||||
| Qalba tal-Azzar | Mili | Saff ta' Barra | Qalba tal-Azzar | Mili | Saff ta' Barra | ||||
| LQ-33/6 | GB1179-83/GB1179-74 | LGJ-33/6 | 356 | - | - | 1066 | 0.88 | 0.18 | |
| LQ-50/8 | JL-50/8 | LGJ-50/8 | 608 | - | - | 1727 | 0.15 | 0.35 | |
| LQ-50/30 | JL-50/30 | LGJ-50/30 | 617 | 608 | - | 1727 | 0.23 | 0.75 | |
| LQ-70/10 | JL-70/10 | LGJ-70/10 | 627 | 606 | - | 1499 | 0.37 | 0.6 | |
| LQ-70/40 | JL-70/40 | LGJ-70/40 | 627 | 606 | 486 | 2240 | 0.71 | 0.1 | 1.26 |
| LQ-95/25 | JL-95/25 | LGJ-95/25 | 777 | 790 | - | 1777 | 1.61 | - | 0.77 |
| LQ-95/55 | JL-95/55 | LGJ-95/55 | 777 | 710 | 508 | 2560 | 0.65 | 0.1 | 0.99 |
| LQ-95/20 | JL-95/20 | LGJ-95/20 | 767 | 707 | - | 1880 | 0.15 | - | 0.83 |
| LQ-120/70 | JL-120/70 | LGJ-120/70 | 247 | 538 | 537 | 2077 | 0.15 | 0.12 | 1.09 |
| LQ-120/25 | JL-120/25 | LGJ-120/25 | 777 | 559 | 559 | 1962 | 0.18 | 0.1 | 1.43 |
| LQ-150/8 | JL-150/8 | LGJ-150/8 | 887 | 856 | 856 | 2188 | 0.67 | 0.14 | 1.24 |
| LQ-150/20 | JL-150/20 | LGJ-150/20 | 887 | 856 | 856 | 2187 | 0.65 | 0.14 | 1.29 |
| LQ-150/25 | JL-150/25 | LGJ-150/25 | 247 | 608 | 608 | 2241 | 0.19 | 0.14 | 1.51 |
| LQ-150/70 | JL-150/70 | LGJ-150/70 | 247 | 608 | 608 | 2243 | 0.19 | 0.14 | 1.54 |
| LQ-185/15 | JL-185/15 | LGJ-185/15 | 387 | 632 | 632 | 2385 | 0.22 | 0.15 | 1.49 |
| LQ-185/30 | JL-185/30 | LGJ-185/30 | 817 | 686 | 686 | 2468 | 0.19 | 0.15 | 2.15 |
| LQ-185/25 | JL-185/25 | LGJ-185/25 | 247 | 787 | 787 | 2862 | 0.47 | 0.23 | 2.42 |
| LQ-185/45 | JL-185/45 | LGJ-185/45 | 247 | 787 | 787 | 2864 | 0.49 | 0.23 | 2.44 |
| LQ-185/90 | JL-185/90 | LGJ-185/90 | 187 | 606 | 606 | 2693 | 0.29 | 0.18 | 2.26 |
| LQ-210/10 | JL-210/10 | LGJ-210/10 | 887 | 686 | 686 | 2412 | 0.29 | 0.17 | 2.46 |
| LQ-210/25 | JL-210/25 | LGJ-210/25 | 247 | 711 | 711 | 2743 | 0.19 | 0.27 | 2.75 |
| LQ-210/50 | JL-210/50 | LGJ-210/50 | 247 | 787 | 787 | 2845 | 0.38 | 0.35 | 2.86 |
| LQ-240/10 | JL-240/10 | LGJ-240/10 | 387 | 787 | 787 | 3245 | 0.47 | 0.37 | 3.42 |
| LQ-240/30 | JL-240/30 | LGJ-240/30 | 817 | 838 | 838 | 3673 | 0.54 | 0.33 | 3.45 |
| LQ-240/55 | JL-240/55 | LGJ-240/55 | 247 | 777 | 777 | 3050 | 0.34 | 0.32 | 3.86 |
| LQ-240/10(I) | JL-240/10(I) | LGJ-240/10(I) | 247 | 688 | 688 | 3124 | 0.29 | 0.32 | 3.76 |
| LQ-300/19 | JL-300/19 | LGJ-300/19 | 247 | 711 | 711 | 3429 | 0.33 | 0.31 | 5.22 |
| LQ-300/25 | JL-300/25 | LGJ-300/25 | 437 | 659 | 659 | 3429 | 0.26 | 0.39 | 4.81 |
| LQ-300/40 | JL-300/40 | LGJ-300/40 | 247 | 787 | 787 | 3429 | 0.34 | 0.42 | 5.24 |
| LQ-300/50 | JL-300/50 | LGJ-300/50 | 247 | 787 | 787 | 3480 | 0.47 | 0.42 | 5.38 |
| LQ-300/70 | JL-300/70 | LGJ-300/70 | 287 | 914 | 914 | 3531 | 0.59 | 0.58 | 5.49 |
| LQ-300/90 | JL-300/90 | LGJ-300/90 | 319 | 914 | 914 | 3677 | 0.59 | 0.59 | 5.67 |
| LQ-400/25 | JL-400/25 | LGJ-400/25 | 427 | 630 | 630 | 4166 | 0.26 | 0.53 | 7.13 |
| LQ-400/30 | JL-400/30 | LGJ-400/30 | 427 | 630 | 630 | 4333 | 0.19 | 0.53 | 8.35 |
| LQ-400/50 | JL-400/50 | LGJ-400/50 | 427 | 689 | 689 | 3554 | 0.29 | 0.52 | 7.03 |
| LQ-400/65 | JL-400/65 | LGJ-400/65 | 427 | 836 | 836 | 4246 | 0.29 | 0.71 | 8.63 |
| LQ-400/85 | JL-400/85 | LGJ-400/85 | 427 | 1168 | 1168 | 4291 | 0.54 | 0.88 | 9.31 |
| LQ-400/95 | JL-400/95 | LGJ-400/95 | 3619 | 1219 | 1219 | 4216 | 0.84 | 0.77 | 9.21 |
Nota: Tifsira tal-ittri u n-numri fil-mudell:
J = Strixxa tal-isplice
L = Tip preformat spirali
Q = Tensjoni sħiħa
Numri = Mudell tal-konduttur korrispondenti tal-prodott
0 = Applikabbli għal wajers tal-aluminju b'qalba tal-azzar f'GB1179 - 74
Din it-tabella telenka biss xi prodotti. Għal prodotti oħra, jekk jogħġbok ikkonsulta l-kumpanija.