Leave Your Message

All Aluminum Conductor AAC BS EN 50182 - China Suppliers & Factory for Cost-Effective Electrical Solutions

,

Execution standard: BS EN 50182 (Old Standard: BS 215-1)

,

Material: The AAC (All Aluminum Conductor) features high-quality AL1 aluminum material.

,

Product application: AAC aluminum stranded conductors provide a cost-effective solution for large-scale electrical infrastructure projects. Compared to heavier conductor types, our AAC conductors deliver excellent performance without compromising on affordability, making them an ideal choice for China-based suppliers and factories involved in electrical distribution.

,
    container

    heading-type-1

    div容器

    Aluminum Stranded Conductor (AAC)
    Code Name Old Code Name Sectional Area Wire Diameter & Stranding Diameter of Conductor Nominal Breaking Load Linear Mass Maximum Resistance at 20℃
    mm² mm No. mm kN kg/km Ω/km
    23-AL1 MIDGE 23.3 2.06 7 6.18 4.2 63.9 1.2449
    27-AL1 GNAT 26.9 2.21 7 6.63 4.83 73.5 1.0643
    37-AL1 MOSQUITO 36.9 2.59 7 7.77 6.27 101.0 0.7749
    43-AL1 LADYBIRD 42.8 2.79 7 8.37 7.28 117.2 0.6678
    53-AL1 ANT 52.8 3.10 7 9.3 8.72 144.7 0.5409
    64-AL1 FLY 63.6 3.40 7 10.2 10.49 174.0 0.4497
    74-AL1 BLUEBOTTLE 73.6 3.66 7 10.98 11.78 201.7 0.3880
    79-AL1 EARWIG 78.6 3.78 7 11.34 12.57 215.1 0.3638
    84-AL1 GRASSHOPPER 84.1 3.91 7 11.73 13.45 230.2 0.3400
    96-AL1 CLEGG 95.6 4.17 7 12.51 15.30 261.8 0.2989
    106-AL1 WASP 106.0 4.39 7 13.17 16.95 290.1 0.2697
    106-AL1 BEETLE 106.4 2.67 19 8.01 18.08 292.7 0.2701
    132-AL1 BEE 132.0 4.90 7 14.7 21.12 361.5 0.2165
    158-AL1 HORNET 157.6 3.25 19 16.25 26.01 433.7 0.1823
    186-AL1 CATERPILLAR 185.9 3.53 19 17.65 29.75 511.7 0.1546
    213-AL1 CHAFER 213.2 3.78 19 18.9 34.12 586.7 0.1348
    238-AL1 SPIDER 237.6 3.99 19 19.95 38.01 653.7 0.1210
    266-AL1 COCKROACH 265.7 4.22 19 29.54 42.52 731.2 0.1081
    323-AL1 BUTTERFLY 322.7 4.65 19 32.55 51.63 887.9 0.0891
    373-AL1 MOTH 373.1 5.00 19 35 59.69 1026.5 0.0770
    372-AL1 DRONE 372.4 3.58 37 25.06 59.59 1027.2 0.0774
    415-AL1 CENTIPEDE 415.2 3.78 37 26.46 66.43 1145.2 0.0695
    486-AL1 MAYBUG 486.1 4.09 37 28.63 77.78 1340.8 0.0593
    530-AL1 SCORPION 529.8 4.27 37 29.89 84.77 1461.4 0.0544
    628-AL1 CICADA 628.3 4.65 37 41.85 100.54 1733.1 0.0459
    Note: The outermost layer is twisted to the right (Z).
    Frequently Asked Questions (FAQ)

    Q: What is Aluminum Stranded Conductor (AAC) used for?

    AAC (Aluminum Stranded Conductor) is primarily used for overhead electricity transmission and distribution lines. It is ideal for urban areas with short spans where high conductivity and flexibility are required.

    Q: What do the code names like "MIDGE" or "WASP" represent?

    These code names are standardized industry terms (often originating from British Standards) used to easily identify specific conductor sizes, stranding configurations, and physical properties without confusing long numerical specifications.

    Q: What is the significance of the "Z" twist direction in AAC?

    The "Z" twist indicates that the outermost layer of the stranded aluminum wires is wound in a right-hand direction. This standard lay direction ensures mechanical stability during installation and compatibility with standard line fittings.

    Q: Why is the maximum electrical resistance measured at 20℃?

    20℃ (68°F) is the globally accepted standard reference temperature for electrical conductivity measurements. Since resistance increases as the temperature of aluminum rises, this standard allows for accurate comparisons between different conductor sizes.

    Q: How does stranding affect the flexibility of the conductor?

    Conductors with a higher number of strands (e.g., 19 or 37 strands) offer greater flexibility and ease of handling compared to those with fewer strands (like 7 strands) for a similar sectional area, making them easier to install around bends.

    Leave Your Message

    AI Helps Write