+86 13777722188
0102030405
0.6/1kV ABC Cable AS 3560.1 - High-Quality China Suppliers & Factory with Optimal Construction and Insulation
container
heading-type-1
div容器
| Type of conductor or core | Nominal cross- sectional area mm² (Core) | Number of wires min. | Resistance at 20 °C Ω/km Max. | Dia. of Conductor (mm) | Breaking force (N) | Thickness of dielectric mm | Outside diameter mm | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIN | MAX | |||||||||||
| Phase or neutral (aluminium) | 16 (2/4) | 6 | 1.91 | 4.5 | 4.8 | 2200 | 1.3 | 7.1 | 7.9 | |||
| Phase or neutral (aluminium) | 25 (2/3/4) | 6 | 1.20 | 5.8 | 6.1 | 3500 | 1.3 | 8.4 | 9.2 | |||
| Phase or neutral (aluminium) | 35 (2/3/4) | 6 | 0.868 | 6.8 | 7.2 | 4900 | 1.3 | 9.4 | 10.3 | |||
| Phase or neutral (aluminium) | 50 (2/3/4) | 6 | 0.641 | 8.0 | 8.4 | 7000 | 1.5 | 11 | 11.9 | |||
| Phase or neutral (aluminium) | 70 (4) | 12 | 0.443 | 9.6 | 10.1 | 9800 | 1.5 | 12.6 | 13.6 | |||
| Phase or neutral (aluminium) | 95 (2/4) | 15 | 0.320 | 11.3 | 11.9 | 13300 | 1.7 | 14.7 | 15.9 | |||
| Phase or neutral (aluminium) | 120 (4) | 15 | 0.253 | 12.8 | 13.5 | 16800 | 1.7 | 16.2 | 17.5 | |||
| Phase or neutral (aluminium) | 150 (4) | 15 | 0.206 | 14.1 | 14.9 | 21000 | 1.7 | 17.5 | 18.9 | |||
What is the material of these conductors?
These conductors are made of aluminium, designed specifically for phase or neutral applications.
What is the standard operating temperature for resistance calculation?
The resistance values provided are calculated at a standard reference temperature of 20 °C.
How do I determine the correct conductor size for my project?
You should select based on the required cross-sectional area and the breaking force specifications relevant to your electrical installation needs.
Does the dielectric thickness vary by conductor size?
Yes, the dielectric thickness ranges from 1.3 mm to 1.7 mm depending on the specific nominal cross-sectional area.
Are these specifications suitable for outdoor overhead lines?
These conductors are typically used in distribution networks; please ensure the breaking force meets your local structural engineering standards for overhead installations.
Where can I find the outside diameter ranges?
The outside diameter (MIN/MAX) is listed in the final columns of the technical table above for each corresponding core size.
